You can use the Wi-Fi Analyzer to determine which channel will be best for the Trackman 4 to be connected on. Allowing for the least amount of noise interfering with the connection.
How To Use the Wi-Fi Analyzer
- Start by opening the Microsoft Store on your computer
- Search for WiFi analyzer
- Install the application
- Open the application
- Select the Analyze Tab
- On the graph look for the channels with the least amount of noise. In this case I would say 4 is going to be the best
- Now that you have identified the best channel, open the web interface.
- For a guide, see How To Connect To The Trackman Web Interface
- Navigate to setup > Wireless
- And change the 2.4 channel to channel 4
- Select "Apply" and the unit will save the changes
- You may have to connect back to the radar after selecting apply