Download Center For Trackman Firmware

Welcome to the Download Center For Trackman Firmware. Here you will find the latest firmware versions available for your Trackman unit.

TrackMan 4 Units

TPS FW 2.7.3-01.png

  1. Once downloaded connect your Trackman 4 to TPS via either ethernet or Wi-Fi
  2. Then enter the Web Interface of the Trackman 4 by going to Settings > Advanced > About > Show Device Web Interface
  3. Once in the Web Interface page you can click Login (no password required) and click Force if prompted
  4. Click on Administration > Upgrade
  5. Choose the tm-xxxx.bin file (the firmware you downloaded earlier onto the PC)
  6. Click 'Upgrade'
  7. The radar will restart several times and will flash green, may take several minutes
  8. Once the green light is solid, the firmware has been applied to the radar
  9. Double check and open up TPS then proceeding to Settings > Advanced > About and check to see if correct version has been applied

Trackman 3e Units

FW_2.6.0_Download_Button-01.png

  1. Once the firmware is downloaded, connect the Trackman 3e using Wi-Fi
  2. Open the webpage http://172.30.20.1/admin-upgrade.html?advanced=1
  3. Click Login (no password needed)
  4. Click Force if prompted
  5. Click Upgrade
  6. Choose the tm3e-ForceFullSwing.bin file you just downloaded
  7. Click the box Forced Upgrade
  8. Click Upgrade
  9. Now the radar will reboot

If you would like assistance with the process above please reach out to our Support Specialists by submitting a support ticket here.

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request