Auto Power On/Off Setting For TrackMan 4

Did you know that you can set up your TrackMan 4 to power on & off automatically using the Auto Power On/Off setting available in the Web Interface?

The Auto Power On/Off feature in the TrackMan Web Interface allows you to control whether the TrackMan is powered on or off directly from a switch or the plug which the charging cable is plugged into.

If the TrackMan is armed and you switch off or unplug the power outlet, it will shut down the TrackMan immediately in a safe manner.

In some regions we offer a One Button Solution (ask you sales rep for more information). Should you have a One Button solution where your TrackMan, PC & Projector are all powered off & on, all you will need to do is press the button to power off your TrackMan 4 unit and then power the unit back on by pressing the button again. This is possible only when the Auto Power On/Off setting is enabled in the Web Interface.

How To Enable The Auto Power On/Off Setting

To enable this setting simply access the web interface of the TrackMan by following the article here: How To Connect To TrackMan Web Interface

Once you have entered the Web Interface and click on Login > Force you will find yourself on the homepage of the Web Interface.

From here you need to click on Setup > Advanced on the left hand side of the screen.


Then you can enable the Auto Power On/Off setting and click on Apply to save your changes.

Once this is done you can then close the Web Interface and enjoy the convenience of the Auto Power On/Off function.

For more information on the benefits of this settings please see the article here: Benefits Of Rebooting Your TrackMan 4 Regularly


Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request