Setup Steps

Step 1: Configure Phone Settings

1. Go to Phone Settings:
   • Open the Settings app on your iPhone.
2. Connect Wifi to Trackman Unit:
   • Default password for all units is password.
3. Access Privacy and Security:
   • Scroll down and select Privacy & Security.
4. Enable Local Network Access:
   • Enter the Local Network settings and ensure that the Trackman Camera App is enabled. This allows the app to communicate with your Trackman unit.

Step 2: Open the Trackman Camera App

1. Launch the App:
   • Open the Trackman Camera App on your iPhone.
2. Connect to the Unit:
   • Follow the on-screen instructions to connect your iPhone to the Trackman unit.

Step 3: Position the Camera

1. Choose Your Angle:
   • Position your iPhone so that the camera is facing the hitting area from your preferred angle. This setup is crucial for capturing the best possible video during your shot analysis.

Step 4: Verify the Connection in TPS

1. Open Shot Analysis:
   • On your computer, open Shot Analysis within the Trackman Performance Studio (TPS).
2. Check the Camera Icon:
   • Look for the camera icon at the top right of the screen. If the iPhone option appears and is green, then everything is connected properly, and your setup is ready to use.

Video Guide