How to Set Up Extended Screens in TPS

1. Connect the Second Screen
   • Ensure that a second screen is properly connected to your computer.
2. Open TPS
   • Launch the TPS software on your computer.
3. Enter Settings 
   • Click the three lines at the bottom right of the TPS window, then select "Settings" from the menu. 
   • In the Settings menu, ensure that Data Compliance is set to “Private” (or "Public" if you log in with an admin account). 
   • This allows screen configurations to be saved based on your preference.
4. Enter Practice Mode
   • Navigate to the Practice section and then select "Shot Analysis".
5. Select the Extended Screen Option
   • Choose a player and club to start a session.
   • In the bottom-left corner of the screen, select the "Extended Screen option".
6. Configure Screen Functions
   • TPS Icon: This icon determines which screen TPS will be displayed on.
   • Projector Icon: This icon selects which screen will display virtual golf.
   • Settings Wheel: This icon controls whether a screen allows interaction.
7. Display Additional Information
   • When a screen is not being used for its primary function (TPS or virtual golf), it can be utilized to show additional information such as:
     • Data numbers
     • Videos
     • Impact location
     • Other helpful information
   • For split-screen setups, you have two options per screen to customize the displayed content.
8. Finalize and Start Your Session
   • Once you have configured the information you want to display, click out of the pop-up menu.
   • Begin your practice session with your extended screens setup.