Manual AFS 

1. Plan Out Frequencies
   • Frequencies range from -5 to +5.
   • Plan the frequency for each bay, ensuring that adjacent bays have frequencies as far apart as possible.
2. Access the Advanced Settings
   • Open TPS (Trackman Performance Studio):
     • Launch the TPS software on your computer.
   • Navigate to Settings:
     • Click the three lines at the bottom right of the screen.
     • Select Settings from the menu.
     • In the Settings menu, click on Advanced Settings at the top right corner.
   • Access Device Web Interface:
     • Scroll down to the bottom left corner and select About.
     • Click Show Device Web Interface.
3. Configure Manual AFS
   • Log In to the Web Interface:
     • When prompted, select Login without entering any credentials (leave the field blank).
   • Set Up Manual AFS:
     • In the web interface, navigate to Setup on the left-hand side.
     • Click on Advanced.
     • Under the AFS section, choose Manual.
     • Enter the planned frequencies for both options as per your frequency plan.
     • Click Apply to save your settings.
4. Repeat for Other Bays
   • Repeat the Process:
     • Follow the same steps to configure Manual AFS for each bay in your facility.
     • Ensure each bay's frequency aligns with your plan to avoid overlap and interference.