Required Equipment

• A router with at least 3 Ethernet ports
• Ethernet cables
• Trackman unit (including TM4)
• Ethernet cable from your building's internet source
• Computer
• iOS devices

Setup Steps

1. Connect the Router:

   • Plug in Ethernet Cables: Connect all the Ethernet cables to the router. This includes:
     • An Ethernet cable running from your building's internet source.
     • An Ethernet cable to the Trackman unit.
     • An Ethernet cable to the computer.

2. Setup for Trackman Unit and Computer:

   • Trackman Unit: Plug one end of the Ethernet cable into the Trackman unit.
   • Computer: Plug one end of the Ethernet cable into your computer.
   • Note: Ensure no other Ethernet cables are connected to your computer, as only the one from the router should be used.

3. Default Network Settings:

   • Find SSID and Password: Locate the default network name (SSID) and password, which can be found on the bottom of the router.

4. Connect iOS Devices:

   • Join the Network: On your iOS devices, go to Settings > Wi-Fi.
   • Select Router’s Wi-Fi: Connect to the router’s Wi-Fi network using the SSID and password found on the router.

Video Guide