The payment configuration will need to be completed before you can board the terminal and proceed with its setup. The article going over these step can be found here: How to Setup Payment Configuration  

What to expect from the Adyen Terminal out of the box:

• When the terminal arrives at your venue, it should already be registered to your location. Upon startup, it should display your shop name.
• Once power on select the settings button located at the bottom left corner to access the network settings.
• To access the network setup, you'll need to enter a code. The code is 0856 (do not change this).
• Now connect the terminal to your wifi.
• If there are any required updates then a prompt on the screen will appear. Start the update.
• Once the update is complete all that is left is to board the terminal.

How to board your Adyen Terminal:

• Navigate to yourgolfbooking.com and login.
• Access your facility through administrate and go to the settings tab.
• Once in the settings tab go to “payment” and find connected devices.
• Click the “Board New Device” button and type in the Adyen Terminals 15-digit serial number ID
• This serial number ID can be found on the box and on the unit itself. 
• Be advised that your terminal/s come with a pre-defined password (0856), and this will be needed upon receipt and setup. 
• Please save your changes and proceed with the setup. 

This terminal is on lease and is the property of Trackman. If you have a physical issue, please contact Trackman support by phone or email. Do not open the device, attempt to repair yourselves, or use a 3rd party. Thank you.