The projector’s Quick Corner feature allows you to adjust the shape and size of an image if it appears uneven or distorted.

Adjusting Quick Corner may affect interactive pen or finger touch calibration.

Display Adjustment

1. Turn on the projector and display an image.
   • You can display a test pattern from the Settings menu to help with alignment.
2. Press the Menu button.
3. Select "Settings", then press Enter.
4. Select Geometry Correction, then press Enter.
5. Select Quick Corner, then press Enter.
   • Press Enter again to open the Quick Corner adjustment screen.
6. Use the arrow buttons on the projector or remote to select the corner you want to adjust, then press Enter.
7. Use the arrow buttons to adjust the image shape as needed.
8. Press Enter to return to the corner selection screen.
9. When finished, press Esc to exit.

Resetting Adjustments

To reset all Quick Corner adjustments, press and hold Esc for at least 2 seconds, then select Yes on the reset screen.