If you're experiencing low FPS for IDS U3 cameras in TPS, please follow these steps:

1. Check the IDS Peak version
   • Ensure your PC is using IDS Peak version 2.7.1 (and not newer versions) for IDS U3 cameras. 
2. Verify camera connections
   • Confirm that all cameras are connected to USB 3.0 ports and that each camera shows a green LED on the rear before launching TPS.
3. Open Shot Analysis
   • Launch TPS and enter Shot Analysis mode.
4. Access camera settings
   • Click the camera icon, then navigate to the Settings tab (the three-slider icon).
5. Remove existing profiles
   • Delete any existing camera profiles currently saved in the settings.
6. Create a new profile
   • Create a new camera profile and configure:
     • FPS to your preferred value
     • Brightness to your desired setting
7. Save the profile
   • Save the new profile once all settings have been configured.
8. Test the cameras
   • Restart or test the cameras again to confirm they are functioning correctly with the new profile.