If your Trackman is not showing up in your Wi-Fi settings of your PC or iOS device, please follow the steps below. 

Connection Checklist

1. Battery status – Check that the Trackman unit is charged. The blinking green lights on the bottom indicate battery level:
   • 4 blinks = 100%
   • 3 blinks = 75%
   • 2 blinks = 50%
   • 1 blink = 25%
   • Red blink = less than 20%
2. Power
   • Make sure the unit is powered on by folding down the back leg.
3. Connection readiness – Confirm the unit is ready to connect:
   • Solid green light next to the camera
   • Flashing blue light on the bottom of the unit
4. Ethernet check
   • Ensure no Ethernet cable is connected. If Ethernet is detected, Wi-Fi is automatically disabled.
5. PC network settings – If you are connecting via PC, verify that Network Discovery and File Sharing are turned on:
   • In the bottom-left search bar, type File Explorer and open it
   • Select Network from the left panel
   • If prompted by a bar at the top, click it and select Turn on network discovery and file sharing
6. Hard reset (if needed)
   • If the unit still does not appear in Wi-Fi settings, try to factory reset the unit: TM4 | Factory Resetting Your TM4