Powering on the TM4

1. Lift the Trackman up
2. Pull out the rear leg of the Trackman until you hear a click
3. The two front legs will then extend automatically
4. Once the legs are extended, the radar is turned on and it will then level itself and be ready for use once the led on the front of the Trackman is a solid green light

Powering off the TM4

1. Lift the Trackman up with the rear leg in the open position
2. Push the rear leg very slightly further down and you will hear a click
3. Then fold the leg back into the Trackman unit
4. The 2 front legs will then retract and the green LED on the front panel will turn off after a few seconds

Video Guide