Please follow the steps below to if experiencing issues where TPS launches before the Trackman connects to the PC. This often causes problems for customers with a seamless setup—especially those using a "One Button Solution," where a single button powers the entire simulator system.

1. First you will need to download the Start Delay Program 
2. Once downloaded you can then open the program
3. 
4. Now that you're in the program you can click on the Green + symbol in the top left corner
5. From here you can add the Trackman Performance Studio application from the following file path : C:\Program Files\TrackMan Performance Studio
6. 
7. Once added, you can then enter a 20 second delay and click on add
8. Then you're all set and can test by powering off the PC and powering it back on
9. If you still notice issues you can extend the delay time to 30 seconds and test again until you find a time which works well, this will vary depending on the performance of the PC